OemetaMetalworking – Coolants
Unimet
Oemeta's line of water-miscible (water-based) metalworking fluids.
Metalworking ProcessGeneral Production Lines
Back to sectors
Sector solutions
Other Industrial Production Areas
Right product selection and after-sales technical support for different production conditions.
Hydraulic & Circulation OilsGear & Reducer OilsAerosols (Sprays)Greases
View filtered productsOemetaMetalworking – Coolants
Novamet
Novamet is Oemeta's series of water-miscible (semi-synthetic) metalworking cooling lubricants used for machining ferrous and non-ferrous metals (steel, stainless steel, aluminum, cast iron, etc.).
Metalworking ProcessGeneral Production Lines
OemetaMetalworking – Coolants
Frigomet
Frigomet, made by Oemeta, is a range of fully synthetic, mineral-oil-free (oil-free), water-miscible metalworking cooling fluids.
Metalworking ProcessGeneral Production Lines
OemetaMetalworking – Coolants
Alumet
Oemeta's line of water-miscible (water-based) metalworking fluids used as coolant/lubricant in machining operations (drilling, turning, milling, tapping, reaming, grinding, deep-hole drilling, etc.) on aluminium, steel, stainless steel, gray cast iron and titanium.
Metalworking ProcessGeneral Production Lines
CondatMetalworking – Neat Oils
Extrugliss
Extrugliss is Condat's range of multi-purpose (2-in-1) forming oils developed for cold forming operations such as cold heading and extrusion.
Metalworking Process
Metalworking – Neat Oils
CoreCut
Product line recorded under the name CoreCut.
Metalworking Process
Metalworking – Neat Oils
CoreGreen MQL
A metalworking fluid stated to be used for minimum quantity lubrication (MQL).
Metalworking Process
Metalworking – Forming Oils
Metal Forming
Metal forming lubricants are a group of products used for friction control, die protection and surface quality in cold/hot forming, drawing, ironing and press operations.
Metalworking ProcessWire, Cable and Forming
WedolitMetalworking – Protective Oils
Wedolit AS
WEDOLiT AS is a range of solvent-based temporary corrosion-preventive fluids used to protect steel and other metals against corrosion during covered/indoor storage.
Metalworking ProcessMaintenance and Service
Metalworking – Protective Oils
MetCoat
"MetCoat" line listed as a protective / corrosion-preventive product in metalworking.
Metalworking ProcessMaintenance and Service
Condoroil Chemical SRLPolymers
CONDORLUBE DF Series
Condorlube DF is a non-reactive, water-based polymeric cold-forming lubricant (lubricant carrier) made by Condoroil Chemical Srl (Condoroil Group).
Metalworking ProcessWire, Cable and Forming
LubpartHydraulic & Circulation Oils
Vigolub HM
HM-type (anti-wear) hydraulic oil for hydraulic and circulation systems.
Hydraulic SystemsGeneral Production Lines
LubpartHydraulic & Circulation Oils
Vigolub HL
Vigolub HL is described as an HL-type mineral-based hydraulic oil range for hydraulic and circulation systems.
Hydraulic SystemsGeneral Production Lines
CondatHydraulic & Circulation Oils
HydroLub
Condat HYDROLUB is a range of HM and HV type mineral-based hydraulic oils (ISO VG 32-68) with anti-wear, anti-corrosion, anti-rust and anti-foam properties for industrial and mobile hydraulic systems.
Hydraulic SystemsGeneral Production Lines
Lubrication Engineers / LE LubricantsGear & Reducer Oils
Duolec Industrial Gear Oil
High-performance industrial gear oil line from Lubrication Engineers (product numbers 1601-1610, 1302, 1304) for industrial gear and bearing applications.
Gear and Reducer Systems
CondatGear & Reducer Oils
MecaGear
Condat's MecaGear (MECAGEAR SY) range is a family of synthetic gear/reducer oils based on PAG (polyalkylene glycol) technology.
Gear and Reducer Systems
CondatGear & Reducer Oils
MecaSynth
Condat MecaSynth (marketed as MecaSynth XHP) is a range of high-performance, long-lasting synthetic gear oils for lubricating enclosed industrial gearboxes and reducers, including heavy-duty gear reducers on equipment such as grinders, crushers and mixers.
Gear and Reducer Systems
LubpartSlideway Oils
Vigolub CGLP TAC
CGLP-type slideway oil used on machine tool and CNC slideways for stick-slip control, surface protection and precise movement.
Metalworking Process
OemetaSlideway Oils
Oemeta CGLP
CGLP is a DIN 51502 classification code for slideway (bedway) lubricating oils with anti-stick-slip additives used on machine-tool guideways; it is not a brand or product-line name and is produced by many manufacturers.
Metalworking Process
CondatAluminium Extrusion Oils & Die Release Agents
B-Stop
Boron nitride-based mould-release varnish supplied in aerosol form.
Aluminum Extrusion
CondatAluminium Extrusion Oils & Die Release Agents
G-Start
Condat G Start is a graphite-based aerosol varnish for coating metallic surfaces.
Aluminum Extrusion
CondatAluminium Extrusion Oils & Die Release Agents
Condalu K
Water-based (emulsion) cutting lubricant used on the aluminium extrusion line to cool and lubricate saw, knife and shear blades when cutting billets before extrusion and extruded profiles after extrusion.
Aluminum Extrusion
CondatAluminium Extrusion Oils & Die Release Agents
Orafor
Condat ORAFOR is a range of graphite-free, water-based synthetic ("white") lubricants for hot and cold forging of steel and aluminium (ORAFOR AL for aluminium).
Rolling and Heavy ProcessAluminum ExtrusionWire, Cable and Forming
CondatAluminium Die Casting
CondaFond
CondaFond is Condat's range of water-based mould-release agents (die coatings) for high pressure die casting (HPDC) of aluminium, magnesium and zinc alloys.
Aluminum Extrusion
CondatCold Forming – Ironing
CondaForm
CondaForm is Condat's lubricant range for cold metal-forming.
Wire, Cable and Forming
LubpartCold Forming – Ironing
MetForm F
Metal forming lubricant indicated for cold forming and metal-spinning (sıvama) operations.
Wire, Cable and Forming
LubpartCold Forming – Ironing
MetForm SF
Forming oil for cold metal forming and metal spinning (flow forming) applications.
Wire, Cable and Forming
LubpartCold Forming – Ironing
MetForm ALR
Forming lubricant used in metal spinning (sıvama) and cold forming operations to reduce friction between tool and workpiece and to support surface quality and tool/mandrel life.
Wire, Cable and Forming
LubpartCold Forming – Ironing
MetForm C
Forming lubricant for cold forming and metal spinning (sıvama) operations, intended for friction control and die/tool protection.
Wire, Cable and Forming
LubpartAerosols (Sprays)
Spreyler
Aerosol/spray maintenance products listed under Lubpart's "Aerosoller" (Aerosols) product category.
Maintenance and Service
LubpartTextile & Knitting Oils
Vigotex
Vigotex is a white-oil based, non-staining and washable lubricant for textile and knitting machines.
General Production Lines
LubpartTextile & Knitting Oils
Vortex
Textile/knitting machine oil intended to protect needles, sinkers and needle beds against friction and wear on knitting and textile machinery; such oils are typically non-staining, washable formulations.
General Production Lines
CondatFire-Resistant Hydraulic Fluids
Condat D Series
Condat D is a range of HFD-U fire-resistant hydraulic fluids (grades Condat D46 and D68).
Hydraulic SystemsRolling and Heavy Process
CondatFire-Resistant Hydraulic Fluids
Condat GUARD C 46
Condat GUARD C46 SF is an HFC water-glycol type fire-resistant hydraulic fluid containing roughly 40-45% water.
Hydraulic SystemsRolling and Heavy Process
Crown TechnologyInhibitors (Rinsing – Acid)
CROWN L-60B
Hydrochloric acid (HCl) pickling inhibitor made by Crown Technology, Inc.
Metalworking ProcessMaintenance and Service
Crown TechnologyInhibitors (Rinsing – Acid)
CROWN NCI-CXM
Crown NCI-CXM (listed by the maker as "Crown Rinse NCI-CXM") is a proprietary non-chelating rinse additive from Crown Technology (CTI Crown Technology, USA).
Metalworking ProcessMaintenance and Service
Condoroil Chemical SRLChrome Coating
CromCoat CR Series
Cromcoat CR, made by Condoroil (Condoroil Chemical SRL, Italy), is a line of trivalent and/or hexavalent chromium-based chromating/passivation conversion-coating agents for galvanized steel, zinc and aluminium surfaces (variants include CR 605, 606, 607, 620, 640, 646, 650, 651).
Maintenance and ServiceGeneral Production Lines
Condoroil Chemical SRLChrome Coating
CromCoat PC
Condoroil Chemical's Cromcoat range are trivalent/hexavalent chromium-based chromating and passivation (conversion coating) chemicals for galvanized steel, zinc, aluminium and alloys, providing corrosion protection and pre-paint surface treatment (e.g.
Maintenance and ServiceGeneral Production Lines
Chrome Coating
Cr+6
An entry covering a hexavalent-chromium (Cr+6) chrome-plating application/process.
Maintenance and ServiceGeneral Production Lines
Condoroil Chemical SRLChrome Coating
Anti-Finger
Condoroil's Antifinger family consists of solvent-based liquid products that form a thin protective film on finished stainless steel surfaces to prevent staining and fingerprints (e.g.
Maintenance and ServiceGeneral Production Lines
Lubrication Engineers / LE LubricantsFood-Grade Lubricants
LE QuinPlex
Lubrication Engineers' food-safe (NSF H1 registered for incidental food contact) lubricant range.
Maintenance and ServiceGeneral Production Lines
Lubrication Engineers / LE LubricantsFood-Grade Lubricants
LE Quincal
Lubrication Engineers' NSF H1-registered synthetic food-grade grease for food-processing equipment (full product name: H1 Quincal Syn FG Grease, 4070-4072).
Maintenance and ServiceGeneral Production Lines
Matrix Speciality LubricantsFood-Grade Lubricants
Foodmax
Foodmax is the food-grade lubricant range of Matrix Specialty Lubricants (Netherlands).
Maintenance and ServiceGeneral Production Lines
CondatFood-Grade Lubricants
Nutrigrease
A food-grade grease manufactured by Condat, based on an aluminium-complex thickener and a pharmaceutical-grade colourless, semi-synthetic base oil (NLGI 1-2, about 150 cSt at 40°C, -20 to +150°C).
Maintenance and ServiceGeneral Production Lines
CondatForging Oils
CondaForge
Condat's CONDAFORGE range (CONDAFORGE 625, 625 RFU, 635) is a line of water-based graphite forging lubricants for hot forging.
Rolling and Heavy ProcessWire, Cable and Forming
CondatForging Oils
Orafor
Condat ORAFOR is a range of graphite-free, water-based synthetic ("white") lubricants for hot and cold forging of steel and aluminium (ORAFOR AL for aluminium).
Rolling and Heavy ProcessAluminum ExtrusionWire, Cable and Forming
Lubritalia S.p.A.Rolling Oils
Lubro DL Series
Lubritalia's series of functional fluids for the cold rolling of steel.
Rolling and Heavy Process
LubpartWire Drawing Oils
MetForm WR
Listed as a metal-forming oil for wire drawing applications.
Wire, Cable and Forming
CondatWire Drawing Oils
Vicafil
Condat's wire-drawing lubricant range.
Wire, Cable and Forming
CondatWire Drawing Oils
SteelSkin
SteelSkin is Condat's range of dry wire-drawing lubricants (soaps/powders) for wire-drawing applications.
Wire, Cable and Forming
Lubrication Engineers / LE LubricantsRotary Kiln Under-Ring Lubrication Blocks
EasyBar with Almasol
Lubrication Engineers solid melting lubrication bar: a patented blend of mineral and metal lubricants suspended in a solid polymer binder that melts at approximately 49C (120F).
Rolling and Heavy ProcessGlass, Cement and Mining
Lubrication Engineers / LE LubricantsGreases
LE Almasol
Almasol is Lubrication Engineers' proprietary solid-film wear-reducing additive (a soft, tan powder developed in the late 1950s) that is blended into many of LE's industrial oils and greases, giving the product family its name.
Bearing and Greasing Points
Lubrication Engineers / LE LubricantsGreases
LE Almatek
Lubrication Engineers' general purpose grease (Almatek General Purpose Lubricant, 1232).
Bearing and Greasing Points
Lubrication Engineers / LE LubricantsGreases
LE Almaplex
Almaplex is Lubrication Engineers' (US) line of aluminum complex thickened industrial greases, including Almaplex Industrial Lubricant 1274/1275 and the synthetic Almaplex Ultra-Syn 1295-1299.
Bearing and Greasing Points
Lubrication Engineers / LE LubricantsGreases
LE Almagard
Lubrication Engineers' (LE) Almagard Vari-Purpose line (3750/3751/3752) is a lithium complex, water-resistant, tacky multi-purpose extreme-pressure (EP) grease.
Bearing and Greasing Points
Greases
Formula FV
Formula FV is a product name whose source could not be verified.
Bearing and Greasing Points
Greases
Formula HVT
Web research could not verify any product named "Formula HVT" from any manufacturer.
Bearing and Greasing Points
BNT ChemicalsTin Coating
BNT COAT 100
BNT-COAT 100 is a monobutyltin trichloride (MBTCl3) based container-glass coating chemical from BNT Chemicals GmbH (Germany).
General Production LinesGlass, Cement and Mining
CondatGlass (Container & Flat Glass)
CondaGlass
Condat's product range dedicated to the glass industry.
Glass, Cement and Mining
CondatGlass (Container & Flat Glass)
Bioglass DLS
Bioglass DLS is a water-soluble (synthetic/emulsion) shear spray lubricant from Condat's Bioglass range for the glass industry.
Glass, Cement and Mining
AcmosGlass (Container & Flat Glass)
Acmos
Range of process chemicals from ACMOS Chemie KG (Bremen, Germany) for glass manufacturing: mould release agents, heat-resistant mould and delivery coatings, sliding agents (conveyor hot/cool end), shear-blade lubricants and mould cleaners.
Glass, Cement and Mining
CondatGlass (Container & Flat Glass)
Glass DL
Condat's GLASS DL range consists of neat mineral or synthetic white oils that lubricate the scoops, deflectors and delivery elements of the feeder system for gob distribution on IS machines in container (hollow) glass production.
Glass, Cement and Mining
Chains
High Temp Oven Chain
High-temperature chain oil for lubricating oven and conveyor chains running continuously at elevated temperatures (typically up to about 280-300 °C).
General Production LinesRolling and Heavy Process
CondatChains
Glass HTS
Range of 100 percent synthetic high-temperature oils for central lubrication and maintenance of Individual Section (IS) machines in the container glass industry.
General Production LinesRolling and Heavy Process
Lubrication Engineers / LE LubricantsOpen Gear Oils
Pyroshield
Lubrication Engineers' line of heavy-duty synthetic open gear lubricants.
Gear and Reducer SystemsRolling and Heavy Process
CondatOpen Gear Oils
Pulstar K OG
Condat PULSTAR-series open gear grease.
Gear and Reducer SystemsRolling and Heavy Process
LubpartWhite Oils
Vigotex Series
Vigotex is a textile and knitting-machine oil series supporting clean operation and wear protection of needles, sinkers and machine elements in textile/knitting production.
General Production Lines
Lubrication Engineers / LE LubricantsSingle-Point Lubrication
Xport FLEX
Xport Flex is an automatic single-point lubricator from Lubrication Engineers; it is a dispensing device, not a lubricant itself.
Bearing and Greasing PointsMaintenance and Service